300Tdi Discovery
12
ENGINE
10
REPAIR
21. With lip side leading, drive-in seal squarely using
special tool LRT-12-082.
22. Refit gear.
FUEL INJECTION PUMP GEAR
Service repair no - 19.30.06
Remove
23. Slacken the three bolts on front of gear.
CAUTION: It is important to ensure that
when the injection pump is locked no
attempt must be made to rotate it. Take
care not to allow the crankshaft to be turned.
24. Remove special tool pin from gear.
25. Remove three bolts and withdraw plate and
gear.
Refit
26. Fit gear and plate and secure with three bolts.
27. Insert pin from special tool LRT-12-045 in
injection pump gear and through into pump
flange.