300Tdi Discovery
CRUISE CONTROL
9
REPAIR
CRUISE CONTROL ECU - Tdi
Service repair no - 19.75.49
Remove
1. Remove 4 studs securing fascia left hand
closing panel.
2. Remove closing panel.
3. Remove nut securing ECU/relay bracket.
4. Lower bracket for access.
5. Remove bottom nut securing ECU to bracket.
6. Open glove box, align stops with cut-outs in
fascia panel and lower.
7. Move SRS harness aside.
8. Remove top nut securing ECU to bracket.
9. Disconnect ECU multiplug.
10. Remove ECU.
Refit
11. Reverse removal procedure. Ensure electrical
multiplug is securely reconnected.