300Tdi Discovery
CRUISE CONTROL
7
REPAIR
CRUISE CONTROL ECU - V8i
Service repair no - 19.75.49
Remove
1. Remove lower dash panel.
2. Disconnect ECU multi-plug.
3. Remove ECU fixing.
4. Remove ECU.
5. Reverse removal procedure. Ensuring that
electrical multi-plug is securely reconnected.
SPEED TRIP ECU - MANUAL V8i
NOTE: The neutral lock out relay
module/speed trip ECU is mounted in the
right hand side footwell. To identify
components.
See Electrical Trouble Shooting
Manual.
VEHICLE SPEED SENSOR
Service repair no - 18.30.22
For Tdi
See FUEL SYSTEM Tdi, Repair, Vehicle
Speed Sensor
For V8i
See FUEL SYSTEM MFI, Repair, Vehicle
Speed Sensor
NEUTRAL LOCK OUT RELAY
Service repair no - 19.75.28
1. Remove 3 studs securing fascia right hand side
closing panel.
2. Release and move closing panel aside.
3. Remove 2 studs securing right hand side ’A’ post
lower trim casing.
4. Remove casing.
5. Locate relay (neutral coloured base) and release
base from bracket.
6. Remove relay.
NOTE: For further information.
See
Electrical Trouble Shooting Manual.
Refit
7. Reverse removal procedure.