300Tdi Discovery
19
FUEL SYSTEM
2
REPAIR
THROTTLE CABLE
Service repair no - 19.20.06
Remove
1. Disconnect battery negative lead.
2. Remove pin and clevis pin securing throttle
cable to throttle lever.
3. Pull ferrule from abutment bracket and withdraw
throttle cable.
4. Release throttle cable from clip on bulkhead.
5. Remove pin and clevis pin securing throttle
cable to throttle lever.
6. Release grommet from bulkhead.
7. Withdraw throttle cable from engine
compartment.
Refit
8. Reverse removal procedure. Use new pins to
secure clevis pins.
9. Adjust throttle cable.
See Adjustment,
Throttle Cable
INTAKE HOSE TURBOCHARGER
Service repair no - 19.42.11
Remove
1. Disconnect battery negative lead.
2. Loosen clip and disconnect intake hose from
turbocharger.
3. Loosen clip and disconnect breather hose from
intake hose.
4. Remove clip and disconnect hose from air
cleaner, discard clip.
5. Remove intake hose
Refit
6. Reverse removal procedure. Use a new clip to
secure intake hose to air cleaner.
