300Tdi Discovery
FRONT AXLE AND FINAL DRIVE
1
OVERHAUL
FRONT DIFFERENTIAL
Service repair no - 54.10.07.
Overhaul
The front and rear differentials are the same. When
overhauling front differential.
See REAR AXLE AND
FINAL DRIVE, Overhaul, Axle Differential
Assembly
FRONT HUB
Service repair no - 60.26.14.
Overhaul
1. Remove front hub assembly.
See Repair,
Front Hub Assembly
2. Remove outer bearing.
3. Mark, for reassembly, relationship between hub
and brake disc, if original hub is to be refitted.
4. Remove five bolts and separate hub from brake
disc.
5. Drift out grease seal and inner bearing from hub
and discard seal.
6. Drift out inner and outer bearing tracks.
7. Clean hub and drift in inner and outer bearing
tracks.
8. Pack hub inner bearing with recommended
grease and fit to hub.
HUB COMPONENTS
1. Dust cap.
2. Drive shaft circlip.
3. Drive shaft shim.
4. Drive member.
5. Drive member joint
washer.
6. Drive member
retaining bolt.
7. Lock nut.
8. Lock washer.
9. Hub adjusting nut.
10. Spacing washer.
11. Outer bearing.
12. Hub.
13. Inner bearing.
14. Grease seal.
15. Brake disc.
16. Disc retaining bolt.