300Tdi Discovery
54
FRONT AXLE AND FINAL DRIVE
2
OVERHAUL
9. With lip side leading fit new seal to hub using
special tool LST 137 seal replacer and drift 18G
134. Drive in seal flush with rear face of hub.
Apply grease between seal lips.
10. Fit brake disc to hub, lining up to marks made
during dismantling. apllying Loctite 270, fit five
retaining bolts. Tighten to
73 Nm.
11. Grease and fit outer bearing to hub.
12. Fit front hub assembly.
See Repair, Front Hub
Assembly