300Tdi Discovery > 75 - SRS Repair > Airbag Diagnostic Control Unit - Distributed SRS
SUPPLEMENTARY RESTRAINT SYSTEM
11
REPAIR
AIRBAG DIAGNOSTIC CONTROL UNIT -
DISTRIBUTED SRS
Service repair no - 76.74.03
Remove
1. Disconnect battery negative lead.
2. Remove centre console assembly.
See
CHASSIS AND BODY, Repair, centre
console.
3. Remove 4 screws and release the 2 rear
passenger air ducts from their fitted position and
remove centre console mounting bracket.
4. Use flat ended screwdriver and release
YELLOW retainer, pull retainer 30mm (1 1/8 in)
from multiplug and disconnect airbag harness
multiplug from airbag control unit.
5. Use special socket, remove 2 screws securing
airbag control unit to body bracket.
6. Remove airbag diagnostic control unit.
Refit
7. Reverse removal procedure.
8. Tighten control unit securing screws to
10Nm (7
lbf ft).
9. Check Supplementary Restraint System using
Testbook.