300Tdi Discovery
76
CHASSIS AND BODY
16
REPAIR
ALPINE LIGHT TRIM CASING
Service repair no - 76.13.20
Remove
1. Remove RH ’E’ post trim casing.
See ’E’ post
trim casing - rh.
2. Remove rear seat belt anchorage retaining bolt
cover.
3. Remove bolt securing rear seat belt anchorage.
4. Remove 2 trim studs securing trim casing.
5. Release trim casing from 2 retaining studs.
6. Remove trim casing.
Refit
7. Fit and align trim casing and secure with studs.
8. Fit 2 trim studs securing trim casing.
9. Position seat belt anchorage, fit bolt and tighten
to
32 Nm (24 lbf ft) .
10. Fit cover to seat belt anchorage bolt.
11. Fit ’E’ post trim casing.
See ’E’ post trim
casing - rh.