300Tdi Discovery
76
CHASSIS AND BODY
54
REPAIR
5. Remove Torx screw securing seat belt.
6. Remove 2 Torx screws securing seat.
7. Disconnect multiplug.
8. Remove seat.
Refit
9. Reverse removal procedure.
10. Tighten Torx screws securing seat to
29 Nm (21
lbf ft) .
11. Tighten bolts securing seat slides to
22 Nm (16
lbf ft) .
12. Tighten Torx screw securing seat belt to
32 Nm
(24 lbf ft) .
FRONT SEAT - MANUAL - 5 DOOR (96 MODELS)
Service repair no - 76.70.01
Remove
1. Raise adjusting bar and slide seat fully
backwards.
2. Remove 2 bolts securing seat slides.
3. Raise adjusting bar and slide seat fully forwards.
4. Remove Torx screw securing seat belt.
5. Remove 2 Torx screws securing seat.
6. Remove seat.
