300Tdi Discovery
CHASSIS AND BODY
53
REPAIR
31. With assistance: Attach suction cups to glass
and lift into position, carefully align the indicators
on the obscuration band with the supports.
Lower screen onto body flange, check alignment
and firmly press to seat glass in the aperture.
NOTE: The finisher on later vehicles will
not have cutouts, or supports fitted, as
shown.
32. Align cut outs with the supports and push
finisher fully onto the glass. Use a wooden block
to ensure fit.
33. Refit ’A’ post finishers and interior mirror.
34. Refit wiper arms.
FRONT SEAT - ELECTRIC
Service repair no - 76.77.01
Remove
1. Operate controls to adjust seat fully backwards
and remove 2 bolts securing seat slides.
2. Operate controls to adjust seat fully forwards.
3. Remove 3 studs securing seat side valance.
4. Remove side valance.