300Tdi Discovery
76
CHASSIS AND BODY
64
REPAIR
GRAB HANDLE - TAIL DOOR - WITH REAR AIR
CONDITIONING FITTED
Service repair no - 76.58.35/20
Remove
1. Remove ’E’ post trim casing.
See ’E’ post trim
casing - lh - with rear air conditioning fitted.
2. Release foam strip from around grab handle
retaining bolts.
3. Remove 4 bolts securing grab handle to body.
4. Remove grab handle.
Refit
5. Position grab handle, fit bolts and tighten to
10
Nm (7 lbf ft) .
6. Secure foam strip to body.
7. Fit ’E’ post trim casing.
See ’E’ post trim
casing - lh - with rear air conditioning fitted.
HEADLINING - WITH SUN ROOF AND REAR AIR
CONDITIONING FITTED - 5 DOOR
Service repair no - 76.64.14/20
Remove
1. Remove both sun visors.
See sun visor.
2. Remove 4 grab handles.
See grab handle.
3. Remove front headlining stowage panel.
See
headlining stowage panel - front - with sun
roof fitted.
4. Remove LH alpine light trim casing.
See alpine
light trim casing - lh - with rear air
conditioning fitted.
5. Remove RH alpine light trim casing.
See alpine
light trim casing.
6. Release LH and RH sun visor clip retaining
screw covers.
7. Remove LH and RH sun visor clip retaining
screws.
8. Remove LH and RH clips.