300Tdi Discovery
CHASSIS AND BODY
31
REPAIR
REAR CENTRE SEAT BELT
Service repair no - 76.73.20
Remove
1. Pull both halves of the seat belt through to the
rear of the seat.
2. Pull back the load space carpet to reveal the
Torx bolt heads.
3. Remove the Torx bolt and plain washer securing
the belt bracket to load space floor.
4. Remove belt complete with bracket.
5. Repeat steps 2 to 4 for other half of belt.
Refit
6. Reverse removal procedure.
7. Finally, tighten the seat belt bolts to
32 Nm (24
lbf ft) .
REAR FOLD DOWN SEAT BELTS
Service repair no - 76. 73.28
Remove
1. Remove the fold down seat or pocket side panel,
whichever is applicable.
See rear fold down
seats.
2. Remove speaker by releasing screws and
disconnecting Lucars. Withdraw rear quarter trim
panel.
3. Remove the rear bodyside lower trim panel.
See
rear compartment lower trim panels.
4. Remove the bolts securing the seat belt halves
to the body side.
Refit
5. Reverse removal procedure.
6. Finally, tighten the seat belt bolts to
32 Nm (24
lbf ft) .