300Tdi Discovery
CHASSIS AND BODY
25
REPAIR
FRONT SEAT COVERS
Service repair no - 76.70.14
Cushion
Remove
1. Remove the seat from the base.
2. Invert the seat on a suitable clean bench.
3. Detach the seat cover retaining clips from the
frame.
4. Release the four wire hooks securing the squab
cover to the lower spring frame.
5. Release the cushion rear clip from the frame and
detach the cushion complete with cover.
6. Remove the cover from the cushion.
Refit
7. Reverse removal procedure.
REAR PASSENGER SEAT
Service repair no - 76.70.37
Remove
1. Feed the seat belts through the seats into the
rear compartment.
2. With the seats in the upright position, remove the
bolts from the front of the hinges.
3. Fold the seats forward, remove the bolts from
the rear of the hinges and withdraw the seats
from the vehicle.
Refit
4. Reverse removal procedure.
5. Tighten fixing bolts to
8 Nm (6 lbf ft) .
