300Tdi Discovery
76
CHASSIS AND BODY
24
REPAIR
SEAT BASE TORSION BARS
Service repair no - 76.71.34
Remove
1. Tilt the seat assembly forward.
2. Remove the torsion bar clamps.
3. Extract the right angled ends of the torsion bars
from the brackets on the seat base and
withdraw.
Refit
4. Reverse removal procedure.
FRONT SEATS 5 DOOR VEHICLES
Service repair no - 76.70.01
Remove
1. Remove the finisher from the seat base.
2. Slide the seat to the full extent rearwards and
remove the front base to floor securing screws.
3. Slide the seat forwards and remove the rear
base to floor securing screw.
4. Lift the seat and base assembly and withdraw
from the vehicle.
Refit
5. Reverse removal procedure.
6. Tighten rear base to floor securing screws to
29
Nm (21 lbf ft) .
7. Tighten front base to floor securing screws to
22
Nm (16 lbf ft) .