300Tdi Discovery
CHASSIS AND BODY
23
REPAIR
SEAT BASE
Service repair no - 76.70.06/25
WARNING: Care must be taken if the seat
lifting mechanism is operated when the
seat is removed from the base otherwise
personal injury could occur.
Remove
1. Remove the seat from the base.
2. Carefully operate the seat mechanism to raise it
to the tilt position.
3. Remove the two bolts securing the rear of the
base to the floor.
4. Return the seat mechanism to the upright
position.
5. Pull the carpet flap forward to expose the front
securing bolts, remove the bolts and lift out the
seat base.
Refit
6. Reverse removal procedure.
SEAT BASE RUNNERS
Remove
7. Remove the seat from the base.
8. Spring the release handle off its locations on the
runners.
9. Slide the runners forward sufficient to gain
access to the rear securing bolts and rearward
for the front bolts.
10. Remove the bolts and withdraw the runners.
Refit
11. Fit the runners and release handle.
12. Reverse removal procedure.
13. Refit the seat to the base.