300Tdi Discovery Repair: Gear Selector Interlock Troubleshooting
86
ELECTRICAL
10
REPAIR
8. Remove 3 clips as shown.
9. Slide trunnion forward and remove gear selector
arm.
10. Remove bolts securing coxcomb.
11. Remove microswitch retaining clip and
microswitch.
Refit
12. Reverse removal procedure, correctly
positioning microswitch.
13. Apply Loctite 242E to castellated plate bolts.
Tighten to
9Nm.
14. Grease all moving parts of gear selector
mechanism. Use Rocol E1A or equivalent
grease.
15. Apply Silcoset 152 sealant or equivalent and fit
side cover to housing.
Interlock microswitch onto side cover
Remove
1. Disconnect battery negative lead.
2. Remove gear selector head and illumination
panel
See CHASSIS AND BODY, Repair,
Centre console
3. Disconnect electrical multiplug.
4. Remove screws from microswitch support
bracket.
5. Disconnect wiring microswitch to multiplug.
Refit
6. Reverse removal procedure. Correctly
positioning microswitch.
7. Grease all moving parts of gear selector
mechanism. Use Rocol E1A or equivalent
grease.