300Tdi Discovery
ELECTRICAL
37
REPAIR
COOLANT TEMPERATURE AND FUEL GAUGES
Service repair no - 88.25.14 - Coolant temperature
gauge
Service repair no - 88.25.26 - Fuel gauge
Remove
1. Remove instrument cowl.
See Instrument
cowl and illumination board
2. Remove speedometer trip reset button sleeve.
3. Remove instrument face plate.
Coolant temperature gauge
4. Remove circuit board,
See Circuit board
5. Remove 3 screws securing coolant temperature
gauge to binnacle, remove gauge.
Fuel gauge
6. Remove 3 screws securing fuel gauge to
binnacle, remove gauge.
Refit
7. Reverse removal procedure.
SPEEDOMETER TRANSDUCER
Service repair no - 88.30.14
Remove
1. Position vehicle on ramp and chock wheels.
2. Raise ramp.
3. Disconnect multiplug from transducer.
4. Remove bolt securing transducer, remove
transducer.
Refit
5. Reverse removal procedure.