Discovery I (LJ) V8-4.0L (1996)
/v8-4.0l/Page-2281004.png)
2.
Locate C.D.L connector. Foam wrap connector block and tape up excess wiring (figure 4)
3.
Locate heated rear window wiring and tape together excess wiring (figure 4).
4.
Locate rear wiper harness and tape the harness to the stiffener bracket (figure 4).
5.
Locate unused cage nuts for the interior handle. Use butyl tape to fill the cage nuts to ensure that they cannot rattle in the rear door (figure 4)
6.
Reinstall the rear end door trim panel.
