Discovery I (LJ) V8-4.0L (1996)
Refit
7. Fit and align trim casing and secure with studs.
8. Fit 2 trim studs securing trim casing.
9. Position seat belt anchorage, fit bolt and tighten to 20 Nm.
10. Fit cover to seat belt anchorage bolt.
11. Fit 'E' post trim casing.
Trim Panel, Rear Compartment Lower LH, With Rear A/C
Trim Panel, Rear Compartment Lower LH, With Rear A/C
Remove
1. Remove rear fold down seat.
2. Remove fold down rear seat belts.
3. Remove 'E' post trim casing.
4. Release load space cover end sleeve from mounting bracket.
5. Remove load space cover.
6. Press rear seat squab release button and fold squab forward.
7. Remove 2 screws securing load space cover mounting bracket.
8. Remove mounting bracket.