Discovery I (LJ) V8-4.0L (1996)
9. Remove 5 trim studs securing trim panel
10. Remove trim panel.
Refit
11. Fit and align trim panel.
12. Fit trim panel retaining studs.
13. Position load space cover mounting bracket and secure with screws.
14. Fold rear seat squab back and secure to latch.
15. Position load space cover to mounting brackets and secure.
16. Fit 'E' post trim casing.
17. Fit fold down rear seat belts.
18. Fit rear fold down seat.
Trim Panel, Rear Door Upper - With Rear Air Conditioning Fitted
Trim Panel, Rear Door Upper - With Rear Air Conditioning Fitted
Remove
1. Remove alpine light trim casing.
2. Release 2 trim panel retaining screw covers.
3. Remove 2 trim panel retaining screws.
4. Release rear edge of trim panel from body.
5. Remove screw securing rear header duct to alpine light duct.
6. Release rear header duct from alpine light duct.
7. Remove trim panel assembly.
Dismantle
8. Remove 2 vents from trim panel.
9. Remove screw securing rear header duct to trim panel.