Discovery I (LJ) V8-4.0L (1996)
Wheel Bearing: Service and Repair
DISASSEMBLE
1. Remove rear hub assembly.
2. Remove outer bearing.
3. Remove five nylock nuts and withdraw ABS sensor ring, if applicable.
4. Mark, for reassembly, position of hub to brake disc.
5. Remove five bolts and separate hub from brake disc.
WARNING: A maximum of two road wheel retaining studs can be renewed.
-
Should more studs be unserviceable install new hub with studs.
6. Remove grease seal and inner bearing from hub.
7. Remove inner and outer bearing races.
ASSEMBLY