Discovery I (LJ) V8-4.0L (1996)
/v8-4.0l/Page-574004.png)
15.
If end play requires adjustment, remove snap ring, measure shim thickness, and fit an appropriate shim to give required end play.
16.
Remove bolt from axle shaft, fit snap ring and dust cap.
17.
Install brake caliper and tighten to 82 Nm (61 lbf. ft).
18.
Bleed brake system.
19.
Install road wheel, remove jack stands, and tighten lug nuts to 126 Nm (93 lbf. ft).
20.
Operate foot brake to locate brake pads before road test.
