Discovery I (LJ) V8-4.0L (1996)
/v8-4.0l/Page-1421001.png)
Throttle Position Sensor: Service and Repair
THROTTLE POSITION SENSOR
(Numbers seen within image reflect procedure step numbers)
Remove
1. Disconnect multiplug from Throttle Position (TP) Sensor.
2. Remove 2 bolts securing TP Sensor. Collect clamp plate.
3. Remove TP Sensor.
Refit
4. Fit TP Sensor. Ensure drive engages correctly with throttle spindle.
5. Position clamp plate. Secure TP Sensor with bolts.
Tighten to 2 Nm (1.5 ft.lb.)
6. Connect multiplug.
