Discovery I (LJ) V8-4.0L (1996)
Impact Sensor: Service and Repair
REMOVE
1. Disconnect the battery negative lead.
2. LH sensor only: Loosen power steering reservoir clamp and lift reservoir to provide access.
3. Disconnect multiplug from sensor
4. Use special socket, remove 2 screws securing crash sensor to body.
5. Remove crash sensor.
REFIT
1. Reverse removal procedure.
2. Tighten crash sensor securing screws to 10Nm (88.5 in lb).
3. Check supplementary restraint system using TestBook *.
*TestBook is a Land Rover proprietary testing tool.