Discovery I (LJ) V8-4.0L (1996)
/v8-4.0l/Page-2200001.png)
Air Bag Control Module: Service and Repair
Airbag Diagnostic Control Unit
Remove
1. Remove centre console.
2. Disconnect connector from control unit.
3. Remove 2 Torx bolts securing control unit to body.
4. Remove control unit.
Refit
5. Position control unit to body, fit Torx bolts and tighten to 10 Nm.
6. Connect control unit connector and secure.
7. Fit centre console.
8. Check supplementary restraint system using TestBook.
