Discovery I (LJ) V8-4.0L (1996)
Seat Belt: Service and Repair
Seat Belt - Rear Centre
Seat Belt - Rear Centre
Remove
1. Pull both halves of the seat belt through to the rear of the seat.
2. Pull back the load space carpet to reveal the Torx bolt heads.
3. Remove the Torx bolt and plain washer securing the belt bracket to load space floor.
4. Remove belt complete with bracket.
5. Repeat steps 2 to 4 for other half of belt.
Refit
6. Reverse removal procedure.
7. Finally, tighten the seat belt bolts to 32 Nm.