Discovery I (LJ) V8-4.0L (1996)
41.20.54
Time: Refer to the Repair Operation Times Manual
for the model under repair
Install new rear output shaft seal and flange
FAULT CODE: M
Normal warranty policy and procedures apply
REPAIR PROCEDURE
CAUTION:
To ensure that the seals are fitted to the correct depth they must be fitted using Service Tool LRT-41-012 (Figure 1). This is a double-ended tool,
identified for use with both front and rear output shaft seals. The installation of the front seal is shown in Figure 1.
1.
Refer to Workshop Manual repair Section 41.20.51 (front output shaft seal) and Section 41.20.54 (rear output shaft seal) for replacement
information.
2.
Replace leaking seals with the seal and flange kits detailed in PARTS INFORMATION.
Technical Service Bulletin # TEC4101982
Date: 980304
Transfer Case - Input Seal Leakage
No:
41/01/98/NAS
Ref:
Overhaul Manual
*Issue:
2
Date:
04/03/98*
PRIDE VI 4-19
Transfer Gearbox Input Seal Leak
AFFECTED VEHICLE RANGE:
DISCOVERY (LJ)
LT230 EQUIPPED
* indicates updated information
SITUATION:
TRANSFER GEARBOX INPUT SEAL LEAKING
In some cases there have been complaints of oil leakage from the transfer gearbox.
RESOLUTION:
REPLACE INPUT SEAL