Discovery I (LJ) V8-4.0L (1996)
Pay special attention to the large hole that exits at the top of the "A" pillar, behind the "A" pillar trim. Pump as much sealant as necessary to
completely fill the hole. This is where the water enters that eventually runs down the "A" pillar and soaks the carpet (illustration).
4.
After completion, inspect the windshield to ensure that all gaps are completely filled. Let sealant dry for about 30 minutes.
WARRANTY:
Normal warranty policy and procedures apply
COMP.CODE:
SRO:
76.81.39 Time 0.45 hr
Repair "A" post leaks.