Discovery II (LT) V8-4.0L (2002)
/v8-4.0l/Page-954002.png)
6. Remove 1st gear, bearing collar, needle roller bearing and synchromesh rings.
7. Noting its fitted position, remove 1st/2nd gear synchronizer hub, 2nd gear synchromesh rings, 2nd gear and needle roller bearing.
8. Using tool LRT-99-002 and support bars under 3rd gear and press off output shaft pilot bearing.
9. Remove spacer, 3rd / 4th gear synchronizer hub, synchromesh baulk rings, 3rd gear and needle roller bearing.
10. Remove output shaft.
