Discovery II (LT) V8-4.0L (2002)
/v8-4.0l/Page-954003.png)
11. Using tool LRT-37-043 and LRT-99-002, remove taper roller bearing from input shaft.
12. Using tool LRT-37-044 and LRT-99-002, remove bearing from splined end of layshaft.
13. Using tool LRT-37-022 and LRT-99-002, remove bearing from 4th gear end of layshaft.
Reassembly
1. Clean layshaft, input shaft and output shaft bearing surfaces.
