Workshop Manuals Factory service & repair Land Rover
01 Introduction02 General information03 Information04 Maintenance05 Engine - K Series06 Engine - L Series07 Emission control08 Engine management system - MEMS09 Engine management system - EDC10 Fuel delivery system11 Cooling system - K Series12 Cooling system - L Series13 Manifold & exhaust systems14 Clutch15 Manual gearbox - PG116 Transfer box - IRD17 Drive shafts18 Rear axle and final drive19 Steering20 Front suspension21 Rear suspension22 Brakes23 Restraint systems24 Body25 Heating & ventilation26 Air conditioning27 Wipers & washers28 Electrical29 Instruments
Land Rover Freelander Workshop Manual (1998-2000)24 · Body
24 · Body & interior

Door striker - check and adjust (Body)

Make
Land Rover
Model
Freelander Workshop Manual
Year
1998–2000
Section
Adjustments › Door striker - check and adjust
BodyDoor striker - check and adjust

DOOR STRIKER - CHECK AND ADJUST

Service repair no - 76.28.05

Check

  1. A closed door should be flush with adjacent panels and edges have equal gap.

Adjust

Door striker - check and adjust – A closed door should be flush with adjacent panels and edges have equal gap.
  1. Loosen 2 Torx screws securing striker.
  2. Adjust striker to obtain required door to panel fit and open and close operation.
  3. Tighten Torx screws to 10 Nm.

Parts & tools for this job For 1998 Land Rover Freelander

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.