Jacking
- Make
- Land Rover
- Model
- Freelander Workshop Manual
- Year
- 1998–2000
- Section
- Lifting and towing › Jacking
InformationJacking · page 1 of 2
JACKING
The following instructions must be carried out before raising the vehicle off the ground:
- Use a solid level surface.
- Apply parking brake.
- Select 1st. gear in main gearbox and ensure HDC is not selected.
CAUTION: To avoid damage to under body components of the vehicle, adhere to the following jacking procedures:
DO NOT POSITION JACKS OR AXLE STANDS UNDER THE FOLLOWING COMPONENTS: • Bumpers • Brake or Fuel lines • Exhaust pipe • Suspension components • Steering rack and linkages • Fuel tank • Engine sump • Gearbox
Jack or support vehicle only on approved jacking points as detailed in the illustration below:
Parts & tools for this job For 1998 Land Rover Freelander
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLSocket setSearch: socket set metric
- BOOKHaynes manualSearch: Haynes manual Land Rover Freelander
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.