Freelander Service Procedures
DOORS
76-1-4
REPAIRS
Door assembly - rear - remove for access
& refit
$% 76.28.02.99
Remove
1. Release 'B/C' post upper finisher from 6 clips
and position aside.
2. Release and disconnect multiplug from lower
'B/C' post.
3. Release harness sheath from 'B/C' post and
pull door harness through 'B/C' post.
4. Remove roll pin from door check strap, and
release check strap from 'B/C' post.
5. Discard roll pin.
6. Remove 2 'C' clips from door hinges.
7. With assistance raise and remove door.
Refit
1. With assistance position door to hinges.
2. Fit 'C' clips to hinge pins.
3. Position check strap to 'B/C' post and secure
with NEW roll pin.
4. Feed door harness through 'B/C' post and
secure harness sheath.
5. Connect and secure multiplug at base of 'B/C'
post.
6. Position 'B/C' post upper finisher and secure
with clips.
7. Check door alignment.
