Freelander Service Procedures
DOORS
REPAIRS 76-1-17
3. Remove screw securing door handle
escutcheon to door and remove escutcheon.
4. Remove cover from door pull and remove 3
screws securing door pull to door.
5. Remove screw cover for access to centre
screw and remove 5 screws securing door
pocket to door.
6. Release 6 trim studs securing trim casing to
door and remove trim casing.
NOTE: Do not carry out further dismantling if
component is removed for access only.
7. Note fitted position of the long trim stud and
remove 6 trim studs from door trim casing.
8. Remove heat stakes securing door pocket to
trim casing.
NOTE: Heat stake procedure is not used on
early 04 MY vehicles.
9. Remove 4 Torx screws securing door pocket to
trim casing and remove pocket.
10. Remove foam pad from sill button guide.
11. Release retainer and remove sill button guide.
12. Release and remove locking ring securing door
pull to trim casing.
13. Remove 2 plastic rivets securing door pull to
trim casing and remove door pull.
NOTE: Plastic rivets are used for production
purposes only. Screws should be used to retain
all parts previously held in place with plastic
rivets.