Freelander Service Procedures
HARNESSES
REPAIRS 86-7-11
41. Position fuse box to body and connect
multiplugs.
42. Fit relays to fuse box bracket.
43. Connect coaxial cable.
44. Fit and connect multiplug to RH 'A' post.
45. Fit passenger compartment fuse box and
secure with bolts.
46. Position side repeater lamps, connect
multiplugs and fit to wings.
47. Secure rear edge of front wheel arch liners.
48. Fit front mud flaps and secure with screws.
49. With assistance feed harness through bulk
head into engine bay.
50. Position harness to wiper motor and connect
multiplug.
51. Fit air intake plenum.
52. Secure harness to LH side of engine bay and
secure fixings.
53. Connect multiplug to inertia switch.
54. Connect multiplugs to underside of fuse box.
55. Fit nuts securing fuse box to brackets.
56. Fit battery connections and multiplug to fuse
box.
57. Fit fuse box cover.
58. Connect 'E' box cooling fan multiplug.
59. Connect 'E' box temperature sensor multiplug.
60. Connect engine harness multiplugs to main
harness.
61. Automatic gearbox only:Connect multiplug to
gearbox ECU.
62. Fit 'E' box cover and secure with Allen screws.
63. Connect engine harness multiplugs to main
harness.
64. Fit harness retaining clips.
65. Models with cruise control: Connect
multiplug to vacuum pump.
66. Connect Lucar connector to starter motor.
67. Connect multiplug to LH ABS speed sensor.
68. Fit LH earth header and secure with nut.
69. Connect multiplug to harness.
70. Connect multiplugs to LH headlamp and
headlamp levelling motor.
71. Secure harness to cooling fan clips.
72. Connect multiplugs to cooling fan pack and
cooling fans.
73. Position bonnet release cable to harness and
secure with cable ties.
74. Fit battery carrier.
75. With assistance feed harness through bulk
head into engine bay.
76. Fit earth header to bulk head and secure with
nut.
77. Fit front screen washer tube to harness.
78. Fit harness retaining clips.
79. Fit PAS and coolant reservoir support bracket
and secure with bolt and nuts.
80. Connect multiplug to bonnet switch.
81. Connect multiplug to brake fluid low level
indicator switch.
82. Fit jack to holder in engine bay.
83. Connect multiplugs to horn, refrigerant
pressure sensor and compressor.
84. Connect multiplugs to RH headlamp and
headlamp levelling motor.
85. Connect multiplug to RH ABS speed sensor
and secure to clips.
86. Connect multiplug to ABS modulator.
87. Fit earth header to RH inner wing and secure
with nut.
88. Position harness to windscreen washer
reservoir.
89. Fit windscreen washer reservoir.
90. Fit engine acoustic cover.
ENGINE - Td4, REPAIRS, Cover -
engine acoustic - Up to 02.5 Model Year.
91. Fit carpet.