Freelander Service Procedures
HEATING AND VENTILATION
REPAIRS
80-11
Harness - positive temperature co-
efficient (PTC) heater - Td4 models
$% 80.20.06
Remove
1. Disconnect battery earth lead.
2. Remove bolt securing PTC cable from positive
side of battery.
3. Remove ECM from 'E' box.
EDC, REPAIRS, Engine control module
(ECM).
4. Disconnect multiplugs from gearbox ECU and
cooling fan sensor
5. Release harness from cable ties and release
relays from inner casing.
6. Release and disconnect cooling fan and joint
harness multiplugs.
7. Release 3 harnesses and air duct rubber
sleeve's from housing.
8. Release clips and remove fuse box cover.
9. Remove nut securing ECM housing.
10. Release housing from retaining brackets and
remove.
M80 0557