Freelander Service Procedures
MAINTENANCE
MAINTENANCE
10-7
Tyres
Check
1. Check for any apparent damage to tyres,
paying particular attention to side walls.
2. Look at tyre treads and check for any unusual
wear patterns which may indicate out of
specification adjustment of steering or
suspension.
NOTE: Any adjustments to steering or
suspension will be subject to additional labour
and/or material cost and should not be carried
out without the authorisation of the customer.
3. Measure the tread depth across the width of the
tyre and around the circumference. Annotate
the maintenance check sheet with the lowest
figure obtained from each tyre.
NOTE: Any requirement to replace tyres should
be advised to the customer before any remedial
work is carried out. This will be subject to
additional labour and/or material cost and
should not be carried out without the
authorisation of the customer.
CAUTION: If new tyres are to be fitted,
ensure that they are fitted to the rear axle
only or to both front and rear axles. DO NOT
fit new tyres to front axle only.
Brake Pads and Calipers
Brake Pads
1. With front road wheels removed, check brake
pad thickness and ensure that both pads are
wearing evenly.
2. Check brake discs for signs of cracking,
excessive scoring or oil contamination.
NOTE: Any requirement to replace brake pads
or brake discs should be advised to the
customer as this will be subject to additional
labour and/or material cost and should not be
carried out without the authorisation of the
customer.
3. Check for any signs of brake fluid leakage from
caliper seals, hoses or unions.
4. Using brake cleaner, remove excessive
deposits of brake dust from pads, calipers and
disc shields.
