Freelander Service Procedures
MAINTENANCE
MAINTENANCE
10-5
Wipers and Washers
Check
1. Operate screen washer and switch on wipers.
Check washer jets are correctly aimed and
check for smooth smearless operation across
screen of wiper blades at all speeds, including
intermittent.
2. Repeat operation for rear screen wipers/
washers.
3. Check all wiper blades for condition and signs
of splits or damage.
4. Check security of wiper arms.
Handbrake
Check
1. With the vehicle stationary and on a level
surface, apply and release handbrake and
check for correct operation. If required, adjust
handbrake.
NOTE: Any adjustment required as a result of
the checking process will be subject to
additional labour and/or material cost and
should not be carried out without the
authorisation of the customer.
Adjust Handbrake
(First 12,000 miles/12 months only)
1. Adjust handbrake cable.
NOTE: Additional time is built into the first
12,000/12 months service time to allow for
handbrake cable adjustment.
