Freelander Service Procedures
SEATS
76-5-10 REPAIRS
8. Release squab cover from squab frame and
squab pad.
9. Drill out 2 pop rivets from squab frame.
10. Remove both head restraint guide tubes.
11. Remove squab cover and pad from frame.
12. Remove 2 bolts from cable control and release
cable control.
13. Release 8 lumbar support retainers from squab
frame and collect 4 hook retainers.
14. Remove lumbar support mechanism.
Refit
1. Position lumbar support to squab frame and
locate hook retainers
2. Fit lumbar support retainers to squab frame.
3. Position cable control and tighten bolts.
4. Fit squab cover and pad to frame.
5. Fit head restraint guide tubes.
6. Position straps and secure with pop rivets.
7. Fit squab cover to squab pad and squab frame.
8. Secure squab cover at base of squab frame.
9. Fit lumbar support control knob.
10. Fit squab frame to cushion frame and tighten
Torx bolts to 45 Nm (33 lbf.ft).
11. Fit side covers and secure retaining studs.
12. Fit head restraint.
13. Fit recline control knob.
14. Fit front seat.