Freelander Service Procedures
TORQUE WRENCH SETTINGS
06-22
Automatic Gearbox – Jatco
†
Tighten in sequence.
+ Apply sealant, Part No. STC 4600 to threads
TORQUE DESCRIPTION
METRIC
IMPERIAL
Air blast cooler assembly to chassis bolts:
⇒
Lower
10 Nm
7.5 lbf.ft
⇒
Upper
5 Nm
3.5 lbf.ft
Air blast cooler fan cowl to matrix bolts
5 Nm
3.5 lbf.ft
Air blast cooler fan motor to cowl bolts
5 Nm
3.5 lbf.ft
Air blast cooler multiplug mounting bracket nut
10 Nm
7.5 lbf.ft
Air blast cooler pipe union nuts
25 Nm
18 lbf.ft
Crankshaft Position (CKP) Sensor
9 Nm
7 lbf.ft
Closing panel to gearbox panel bolt
10 Nm
7.5 lbf.ft
Drive plate to converter bolts
45 Nm
33 lbf.ft
Earth lead to gearbox housing bolt
25 Nm
18 lbf.ft
Fluid cooler to mounting bracket bolts (KV6)
25 Nm
18 lbf.ft
Fluid cooler mounting bracket bolts (KV6):
⇒
M8
25 Nm
18 lbf.ft
⇒
M12
85 Nm
63 lbf.ft
Fluid cooler mounting bolts (Td4):
⇒
2 off
45 Nm
33 lbf.ft
⇒
1 off
25 Nm
18 lbf.ft
Fluid cooler hoses to gearbox
18 Nm
13 lbf.ft
Fluid cooler hose unions
18 Nm
13 lbf.ft
Fluid pan bolts
†
+
7 Nm
5 lbf.ft
Gearbox closing plate bolt (Td4)
10 Nm
7.5 lbf.ft
Gearbox drain plug
45 Nm
33 lbf.ft
Gearbox level plug
14 Nm
10 lbf.ft
Gearbox housing to sump
85 Nm
63 lbf.ft
Gearbox to engine bolts
85 Nm
63 lbf.ft
Gearbox mounting bracket bolts
85 Nm
63 lbf.ft
Gearbox mounting through bolt
100 Nm
74 lbf.ft
Inhibitor switch bolts
3 Nm
2.2 lbf.ft
IRD cooling hose retainer bolt (KV6)
25 Nm
18 lbf.ft
IRD support bracket mounting bolts
†
(KV6)
50 Nm
37 lbf.ft
IRD support bracket to engine front mounting bracket bolts
†
(KV6)
50 Nm
37 lbf.ft
IRD support bracket to sump bolts
†
(KV6)
45 Nm
33 lbf.ft
IRD to gearbox bolts (KV6)
80 Nm
59 lbf.ft
Manifold heatshield to IRD support bracket (KV6):
⇒
Bolts
9 Nm
7 lbf.ft
⇒
Nut
45 Nm
33 lbf.ft
Manifold heatshield to IRD pinion housing nut (KV6)
25 Nm
18 lbf.ft
Selector housing nuts
10 Nm
7.5 lbf.ft
Selector cable trunnion nut
6 Nm
4.5 lbf.ft
Selector lever to gearbox selector shaft nut
25 Nm
18 lbf.ft
Starter motor to gearbox bolts
45 Nm
33 lbf.ft
Torque converter access plate bolts
9 Nm
7 lbf.ft
