Freelander Service Procedures
TORQUE WRENCH SETTINGS
06-13
Fuel delivery system – Petrol
1
Tighten in sequence using the procedure defined in 'Repairs' section.
ENGINE MANAGEMENT SYSTEM - SIEMENS, REPAIRS, Sensor - combined - manifold absolute
pressure/Intake air temperature (MAP/IAT).
TORQUE DESCRIPTION
METRIC
IMPERIAL
Air cleaner to battery tray bolts
9 Nm
7 lbf.ft
Fuel filler neck to body nuts and bolt
9 Nm
7 lbf.ft
Fuel pump/sender unit to tank locking ring
35 Nm
26 lbf.ft
Fuel rail to inlet manifold bolt
8 Nm
6 lbf.ft
Fuel tank to body bolts
40 Nm
29 lbf.ft
Heated Oxygen (HO
2
S) Sensor
40 Nm
29 lbf.ft
Ignition coils to LH inlet manifold nuts and bolts - KV6 - Up to 03 Model Year
9 Nm
7 lbf.ft
Inertia (fuel cut-off) switch
2 Nm
1.5 lbf.ft
Intake Air Control Valve (IACV) to throttle body Allen screws
6 Nm
4.5 lbf.ft
Subframe to body bolts
190 Nm
140 lbf.ft
Throttle housing to inlet manifold bolts
1
(K1.8)
⇒
1st. stage
4 Nm
3 lbf.ft
⇒
2nd. stage
9 Nm
7 lbf.ft
Throttle body to inlet manifold chamber Torx screws (KV6)
8 Nm
6 lbf.ft
Throttle actuator support bracket to throttle body Torx screws (vehicles with cruise
control only)
9 Nm
7 lbf.ft
Throttle position sensor to housing Torx screws
1.5 Nm
1.1 lbf.ft
VIS motor to inlet manifold chamber screws (KV6 only)
8 Nm
6 lbf.ft