Freelander Service Procedures
TORQUE WRENCH SETTINGS
06-25
Steering
*
Tighten with weight of vehicle on suspension
TORQUE DESCRIPTION
METRIC
IMPERIAL
Ball joint to steering arm nuts
55 Nm
41 lbf.ft
Coolant rail to cylinder block bolts (KV6)
9 Nm
7 lbf.ft
Gear change linkage to bulkhead bolts (Td4 manual)
25 Nm
18 lbf.ft
Heatshield nuts (KV6)
25 Nm
18 lbf.ft
Interlock cable to column lock union (JATCO)
4 Nm
3 lbf.ft
IRD hose clip bolt (Td4)
25 Nm
18 lbf.ft
Key cable clamp bolt (JATCO)
6 Nm
4.5 lbf.ft
PAS pipe clip to engine lifting eye bolt
10 Nm
7.5 lbf.ft
PAS high pressure pipe clip bolt
8 Nm
6 lbf.ft
PAS fluid pipe bracket bolts
10 Nm
7.5 lbf. ft
PAS outlet hose to pump banjo bolt (KV6 & K1.8)
20 Nm
15 lbf.ft
PAS outlet hose to pump banjo bolt (Td4)
25 Nm
18 lbf.ft
PAS outlet pipe clip bolt
22 Nm
16 lbf.ft
PAS pipe to clamp bolt
22 Nm
16 lbf. ft
PAS pipe to engine front mounting plate bolt (KV6)
25 Nm
18 lbf.ft
PAS pipe support bracket to RH hydramount nut (KV6)
85 Nm
63 lbf.ft
PAS pipe to RH turret clip bolt
10 Nm
7.5 lbf.ft
PAS pump high pressure pipe union
25 Nm
18 lbf.ft
PAS pump pulley bolts
10 Nm
7.5 lbf.ft
PAS pump to mounting bracket bolts (KV6 & K1.8)
25 Nm
18 lbf.ft
PAS pump to mounting bracket bolts (Td4):
⇒
M6
10 Nm
7.5 lbf.ft
⇒
M8
25 Nm
18 lbf.ft
PAS pump mounting to cylinder block bolts
45 Nm
33 lbf.ft
PAS rack fluid feed pipe union nut
18 Nm
13 lbf. ft
PAS rack fluid return pipe union nut
22 Nm
16 lbf. ft
PAS rack mounting and clamp to bulkhead bolts
45 Nm
33 lbf. ft
Ram feed pipe union nuts:
⇒
Small (6mm) diameter
18 Nm
13 lbf.ft
⇒
Large (10 mm) diameter
24 Nm
18 lbf.ft
Steering column height adjuster clamp bolt and nut
10 Nm
7.5 lbf.ft
Steering column height adjuster clamp bolt and nut
12 Nm
9 lbf.ft
Steering column bracket side support bolt
10 Nm
7.5 lbf.ft
Steering column lock bolt
SHEAR
Steering column to fascia support rail (Nyloc) nuts and bolts
14 Nm
10 lbf.ft
Steering column to PAS rack pinion clamp pinch bolt
1
32 Nm
24 lbf. ft
Steering wheel nut
45 Nm
33 lbf.ft
Track-rod ends to steering arm nuts
55 Nm
41 lbf.ft
Track-rod end pinch bolt *
28 Nm
21 lbf.ft
Track-rod to rack bolts
100 Nm
74 lbf.ft
Turnbuckle lock nuts
90 Nm
66 lbf.ft