Windscreen (page 3 of 3)

17. With assistance, lift screen into place and align to screen supports and tape. Raise screen up to roof on ratchet support blocks. Lightly press glass to fully seat sealer.
18. Remove protective covers and tape.
19. Test sealer for leaks, apply additional sealer if necessary. If water is used, allow sealer to dry before testing. Spray water around glass and check for leaks. Mark any area that leaks. Dry glass and sealer then apply additional sealer.
20. Fit ’A’ post trims. See Repairs.
21. Fit headlining retaining stud.
22. Fit sun visor retaining clips and sun visors.
23. Fit interior mirror. See Repairs.
24. Fit air intake panel and wipers. See HEATING & VENTILATION, Repairs.

CAUTION: A curing time of 6 hours is desirable, during this time leave a window open and do not slam the doors. If the car must be used, drive slowly.