landrover Workshop Repair Guides

Land Rover Workshop Service and Repair Manuals

Gearbox/converter & transfer gearbox assembly - remove for access and refit|Page 445 > < Gearbox/converter & transfer gearbox assembly - remove for access and refit
Page 369
background image

AUTOMATIC TRANSMISSION - ZF 5HP24

44-2-14 REPAIRS

6. Release clips securing LH oxygen sensor lead 

from gearbox bell housing.

7. Remove 2 Torx bolts from top of bell housing.
8. Raise vehicle on lift.
9. Remove rear propeller shaft.

 

 + 

 DRIVESHAFTS, REPAIRS, Propeller 

shaft - rear.

10. Remove front propeller shaft.

 

 + 

 DRIVESHAFTS, REPAIRS, Propeller 

shaft - front.

11. Remove 5 nuts, release LH heat shield and 

remove.

12. Drain gearbox fluid.

 

 + 

 AUTOMATIC TRANSMISSION - ZF 

5HP24, ADJUSTMENTS, Gearbox fluid - 
drain & refill.

13. Using LRT-44-032 support gearbox on jack, 

arrow in graphic points towards front of vehicle.

14. Remove nut and bolt securing mounting to 

cross member.

15. Remove 6 bolts securing cross member and 

remove cross member.

16. Remove snubbers from mounting.

M41 7828

Gearbox/converter & transfer gearbox assembly - remove for access and refit|Page 445 > < Gearbox/converter & transfer gearbox assembly - remove for access and refit