L322 Range Rover Service Procedures
ENGINE - V8
12-2-88 OVERHAUL
4. Fit LRT-12-223/4 and LRT-12-223/3 to rear of
LH camshafts and tighten bolt securing tools.
5. Fit LRT-12-223/5, LRT-12-223/6 to LH cylinder
head and tighten LRT-12-223/6 into spark plug
thread.
6. Rotate engine crankshaft pulley clockwise to
align TDC timing mark.
NOTE: Raise timing chain and hold under
tension while turning crankshaft pulley.
7. Position LRT-12-227 through timing tool
access hole and secure flywheel in TDC
position.
8. Fit LH VCC unit.
Engine - V8, OVERHAUL, Variable
camshaft unit - variable camshaft control
(VCC).
9. Fit coolant pump to coolant manifold pipes.
Engine - V8, OVERHAUL, Pipe(s) -
water pump to coolant manifold.
10. Clean exhaust manifold mating faces and fit
new gaskets.
11. Apply copper grease to exhaust manifold studs,
fit exhaust manifold, fit 8 new nuts securing
exhaust manifold and tighten to 23 Nm (17
lbf.ft).