landrover Workshop Repair Guides

Land Rover Range Rover Service Procedures Workshop Manuals

Gasket - camshaft cover - LH > < Gasket - cylinder head - RH|Page 197
Page 155
background image

ENGINE - V8

12-2-12 REPAIRS

10. Fit LRT-12-223/2 and LRT-12-223/1 to rear of 

RH camshafts and tighten bolt securing tools.

11. Fit LRT-12-223/5LRT-12-223/6 to RH cylinder 

head and tighten LRT-12-223/6 into spark plug 
thread.

12. Rotate engine crankshaft pulley clockwise to 

align TDC timing mark.

NOTE: Raise timing chain and hold under 
tension while turning crankshaft pulley.

13. Position LRT-12-227 through timing tool 

access hole and secure flywheel in TDC 
position.

14. Fit LRT-12-226 to VCC solenoid and fit 

solenoid.

15. Fit RH VCC unit.

 

 + 

 Engine - V8, REPAIRS, Variable 

camshaft unit - variable camshaft control 
(VCC) - RH.

16. Fit coolant pump to coolant manifold pipes.

 

 + 

 COOLING SYSTEM - V8, REPAIRS, 

Pipe(s) - coolant pump to coolant manifold.

17. Fit RH exhaust manifold.

 

 + 

 MANIFOLD AND EXHAUST SYSTEM 

- V8, REPAIRS, Gasket(s) - exhaust manifold 
- RH.

18. Fit new oil filter and fill engine with oil.

 

 + 

 MAINTENANCE, PROCEDURES, 

Engine oil and filter - V8 engine.

19. Fill cooling system.

 

 + 

 COOLING SYSTEM - V8, 

ADJUSTMENTS, Coolant - drain, flush & 
refill.

20. Connect battery earth lead.

Gasket - camshaft cover - LH > < Gasket - cylinder head - RH|Page 197