L322 Range Rover Service Procedures
HEATING AND VENTILATION
REPAIRS
80-13
Fuel Burning Heater (FBH) - Td6
$% 80.40.01
Remove
1. Remove battery carrier.
2. Remove front wheel arch liner.
3. Drain coolant.
ADJUSTMENT, Coolant - drain and refill.
4. Position container to collect coolant spillage.
5. Release clips, disconnect coolant feed and
return hoses from FBH.
CAUTION: Before disconnecting or
removing components, ensure the
immediate area around joint faces and
connections are clean. Plug open
connections to prevent contamination.
6. Position an absorbent cloth, release clip and
remove fuel feed hose from FBH. Plug
connections and move aside.
7. Remove 2 bolts securing FBH to mounting
bracket
8. Release FBH from mounting, disconnect
multiplugs and move assembly aside.
NOTE: Do not carry out further dismantling if
component is removed for access only.
9. Remove 3 bolts securing FBH to mounting
bracket.
10. Remove bracket.
11. Cut and discard cable tie securing intake filter
to FBH. Release clip and remove intake
assembly.
Refit
1. Fit intake assembly and secure clips.
2. Fit FBH mounting bracket and tighten bolts to
10 Nm (7 lbf.ft).
3. Connect multiplugs to FBH.
4. Align FBH exhaust to silencer, fit to mounting
and tighten bolts to 10 Nm (7 lbf.ft).
5. Fit coolant hoses to FBH and secure with clips.
6. Fit fuel feed hose to FBH and secure with clip.
M80 0518