L322 Range Rover Service Procedures
RESTRAINT SYSTEMS
75-2
REPAIRS
Seat belt - centre - rear
$% 76.73.20
Remove
1. Remove seat base finisher.
SEATS, REPAIRS, Finisher - seat
2. Remove seat fold mechanism.
SEATS, REPAIRS, Hinge - rear seat
3. Remove Torx bolt securing squab frame to seat
frame and separate frames.
4. Disconnect multiplug from heated squab cover.
5. Release seat cover beading from sides and
front of seat.
6. Raise seat cover and cushion, remove and
discard Torx bolt securing seat belt anchor
point to frame.
7. Pull seat belt through cushion and cover,
remove seat base.
8. Remove rear squab finisher.
SEATS, REPAIRS, Finisher - rear
9. Remove armrest front finisher assembly.
SEATS, REPAIRS, Finisher - arm
10. Remove 2 screws securing seat belt finisher
and remove finisher.
11. Release beading securing squab cover to sides
and bottom of frame.
12. Carefully release 4 clips securing seat release
button escutcheon, remove escutcheon.
M78 0646