Land Rover Workshop Service and Repair Manuals

SEATS

76-5-32 REPAIRS

21. Remove 19 hog rings securing squab cover to 

pad, remove cover.

22. Release retaining plate securing headrest 

finisher to squab cover, remove finisher.

Refit

1. Fit headrest finisher to squab cover and secure 

with retaining plate.

2. Position squab cover to pad and secure with 19 

hog rings.

3. Fit squab cover and pad to frame.
4. Fit 4 retaining strips securing both sides of 

squab cover to frame.

5. Position and fit squab assembly to seat 

assembly.

6. Fit squab frame to seat frame, secure with Torx 

bolts tighten to 25 Nm (18 lbf.ft).

7. Secure squab harness to retaining clips
8. Fit retaining strips securing both sides of lower 

squab cover.

9. Connect multiplug to heated seat circuit.

10. Connect lumbar harness multiplugs to pump 

and valve.

11. Connect multiplugs to headrest and squab 

motor.

12. Fit retaining strip securing lower squab cover to 

frame.

13. Fit headrest and secure to motor housing.
14. Position upper finisher and secure retaining 

clips.

15. Secure squab cover beading to finisher.
16. Secure squab cover velcro strip
17. Connect tension straps securing upper squab 

cover.

18. Position lower finisher and secure retaining 

clips

19. Fit screws securing lower squab finisher.
20. Fit backboard tension straps to under seat 

retaining clips.

21. Fit seat assembly.

 + 

 SEATS, REPAIRS, Front seat.