Workshop Manuals Factory service & repair Land Rover
01 Introduction02 Fuse details03 Earth points and headers04 Description and operation05 Connectors
Land Rover L322 Range Rover Electrical Library04 · Description and operation
04 · General

Drivers Door Module

Make
Land Rover
Model
Range Rover L322 Range Rover Electrical Library
Section
Interior illumination › Drivers Door Module
Description and operationDrivers Door Module

All the above are earthed on N wires. The LCM also provides a feed to the following LED's on SR wires:

Front interior lamp LED's (C0355) Rear interior lamp LED (C0357) RH rear door handle LED (C2335) LH rear door handle LED (C2335)

NOTE: The LH and RH rear door handle LED's have the same connector number as they utilise the same harness.

All the above are earthed on N wires.

Drivers Door Module

When the drivers door module (C2058) receives an illumination feed from the LCM, it illuminates the following LED's by providing a feed on SR then SU wires:

Drivers door interior handle LED Door pocket front LED Door pocket rear LED.

Passenger Door Module

When the passenger door module (C2057) receives an illumination feed from the LCM, it illuminates the following LED's by providing a feed on SR then SU wires:

Passenger door interior handle LED Door pocket front LED Door pocket rear LED.

Parts & tools for this job For Land Rover Range Rover

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.